东莞龙翔体育设施有限公司官网欢迎您的到来!

Online message About us Sitemap 中文 / English

National professional sports field material supplierPlastic track materialSilicon PU course materialAcrylic stadium material

National service hotline

0769-88031856

400-811-0201

product category

contact us

National service hotline:076988031856&
E-mail:2431773475@qq.com
Chinese website:www.longxiangtiyu.com
company address:16th Floor, Changping Chamber of Commerce Building, Changping Town, Dongguan, Guangdong, China    
Factory address:No.143, Zhuyuan Group, Xitian Village, Shiwan Town, Boluo County, Huizhou city, Guangdong Province。China

公司新闻

Your current location: Home > Industry information > 公司新闻 >

Description of Epoxy Floor Acceptance Criteria

发布日期:2019-09-28 点击:

 What are the acceptance criteria for epoxy floor? Perhaps many of the small partners don’t understand it. Here are the criteria for the acceptance of epoxy floor in the simple science of the following, as follows:

体育运动器材公司
1. When the ambient temperature is 25 °C, it should be 2-3 days after construction, that is, the hardness reaches about 80% of the completion of curing;
2, the surface can not appear sticky;
3, air bubbles: flat coating type, mortar type without bubbles, self-leveling allows 1 small bubble / 10 square meters;
4, good leveling, no knives, large-area interface is basically flat;
5, no floating color, uniform color, large-area interface allows for extremely inconspicuous color difference;
6, no coarse impurities, but allow the floating dust in the air to fall into the smallest defects caused;
7, the surface of the floor should be smooth and smooth, the gloss should meet the design requirements (high gloss ≥ 90, light ≥ 70, half light 50 ~ 70), flat coating type is light, water is semi-light ~ no light;
8, orange peel, mortar anti-slip surface effect should be very obvious.