What are the acceptance criteria for epoxy floor? Perhaps many of the small partners don’t understand it. Here are the criteria for the acceptance of epoxy floor in the simple science of the following, as follows:
1. When the ambient temperature is 25 °C, it should be 2-3 days after construction, that is, the hardness reaches about 80% of the completion of curing;
2, the surface can not appear sticky;
3, air bubbles: flat coating type, mortar type without bubbles, self-leveling allows 1 small bubble / 10 square meters;
4, good leveling, no knives, large-area interface is basically flat;
5, no floating color, uniform color, large-area interface allows for extremely inconspicuous color difference;
6, no coarse impurities, but allow the floating dust in the air to fall into the smallest defects caused;
7, the surface of the floor should be smooth and smooth, the gloss should meet the design requirements (high gloss ≥ 90, light ≥ 70, half light 50 ~ 70), flat coating type is light, water is semi-light ~ no light;
8, orange peel, mortar anti-slip surface effect should be very obvious.
